Service manual

ESIE05-03 Disassembly and Maintenance: Outdoor Units
Part 5 – Disassembly and Maintenance 5–5
3
5
1
5
1.2.1 Removal of Outside Panels
Warning Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.
Procedure
Step Procedure Points
1
2
3
4
5
6
For the suction grille, pull
the lower parts (in 7
places) frontward,
disengage the hooks at
the top of the grille with a
slotted screwdriver, and
then push the overall
grille downward to
disassemble it.
For the front panel (side
front panel), unscrew a
single mounting screw
and then push this panel
downward to remove it.
For the top panel,
unscrew the eight
mounting screws and
then remove this panel.
For the front panel of the
piping cover, unscrew a
single mounting screw
and then remove this
panel.
For the side panel of the
piping cover, unscrew
the four mounting screws
and then remove this
panel.
For the rear panel,
unscrew the six
mounting screws and
then remove this panel.
P RZQ71B8V3B
P RZQ100~125B8V3B/RZQ100~140B7W1B
ESIE05-03.book Page 5 Wednesday, April 6, 2005 4:09 PM