Specifications

SiBE341027 Features
General Information 11
System flexibility
An increased number of connectable indoor units
in a single system
More indoor units can be connected in a single system, enabling consolidation of existing piping!
The number of connectable indoor units has been drastically increased from 30 to 64.
Conventional
VRV K PLUS series: RX(Y) 24 - 30K
(model from 14 years previous)
Up to 30 indoor units
connectable
Up to 64 indoor units
connectable
Condensed into
a single system
Where several systems
used to be required ...
Simple to deploy even in long, wide
buildings with many small rooms
Pipe size: φ 28.6, φ 12.7
Pipe size: φ 28.6, φ 12.7
Before replacement
After replacement
10 HP
VRV III - Q for replacement use enables the system capacity to be increased
without changing the refrigerant piping. For example, it is possible to install a
16 HP VRV III - Q using the refrigerant piping of an 10 HP R - 22 system.
System can be upgraded using existing piping
Reuse of existing piping
2.5 HP
× 4 units
× 4 units 4.0 HP
* For reuse of existing refrigerant piping, it is possible to use piping or branched piping capable of handing 3.3 Pa or more. Heat insulation is
necessary for liquid piping and gas piping.
:RQYQ40 - 48P
Enables increased capacity
16 HP
R - 22
R - 22
R - 410A
R - 410A