Specifications

SiBE341027 Troubleshooting by Remote Controller
Service Diagnosis 161
Troubleshooting
Go on to the Diagnosis Flow 1
Go on to the Diagnosis Flow 2
Go on to the Diagnosis Flow 3
Go on to the Diagnosis Flow 4
Go on to the Diagnosis Flow 5
Go on to the Diagnosis Flow 6
Go on to the Diagnosis Flow 7
Go on to the Diagnosis Flow 8
Check the LED lamps for
“Confirmation of error 3”
corresponding to the error
code “
U7
” and for Confirmation
of error 4 in the monitor mode.
Confirmation of error 3 Confirmation of error 4
Confirmation of error 3 Confirmation of error 4
Confirmation of error 3 Confirmation of error 4
Confirmation of error 3 Confirmation of error 4
Confirmation of error 3 Confirmation of error 4
Confirmation of error 3 Confirmation of error 4
Confirmation of error 3 Confirmation of error 4
Confirmation of error 3 Confirmation of error 4
Caution
Be sure to turn off power switch before connect or disconnect connector,
or parts damage may be occurred.