Service manual

Si06-305 Outdoor Unit
Removal Procedure 129
2.2 Removal of Bellmouth and Left Side Plate
Procedure Warning Be sure to turn off all power supplies at least 10 min. before disassembling work.
Step Procedure Points
1
The bellmouth is
attached to the front
plate with two screws
and four hooks.

Remove the bellmouth from
the front plate after removing
the two screws which are set
below.
2
Remove the two
screws and undo the
four hooks to release
the bellmouth.

Slide the bellmouth in the
arrow direction to disengage
the hook B.