Service manual

Si06-305 Indoor Unit
Removal Procedure 117
1.2 Removal of the Horizontal Blade
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work
Step Procedure Points
1
Open the horizontal
blade.
2
Disengage the
supporting bracket at
the center position.
3
Bend the horizontal
blade slightly to
disengage the shafts at
left and right side of the
blade.

For installation, engage the
supporting bracket at center
of the blade after insert the
shafts at both ends to the
pivot holes.