User`s manual

5 English
• Each time you press the operation selection button, the
operation mode display will change as shown in the figure
below.
Example 1:
In case of the remote controller “BRC1C61” and as equivalent.
Display changes as below.
NOTE) Current Ventilation mode can be visible and
selected on the remote controller.
Example 2:
In case of the remote controller “BRC1A61,62”
Display changes as below.
NOTE) Current Ventilation mode doesn’t be displayed.
• When the display shows “” (time to clean air filter), ask a
qualified service person to clean the filters (Refer to the
chapter “MAINTENANCE”).
<Operation mode>
VRV:
Cooling mode
HRV:
Heat exchange mode
VRV:
Fan mode
HRV:
Heat exchange mode
VRV:
Stopping
HRV:
Heat exchange mode
When air conditioner and HRV
unit are not connected via duct
<Operation mode>
VRV:
Cooling mode
HRV:
Heat exchange mode
VRV:
Fan mode
HRV:
Heat exchange mode
When air conditioner and HRV
unit are connected via duct
<Operation mode>
VRV:
Cooling mode
HRV:
Heat exchange mode
VRV:
Fan mode
HRV:
Heat exchange mode
VRV:
Stopping
HRV:
Heat exchange mode
When air conditioner and HRV
unit are not connected via duct
<Operation mode>
VRV:
Cooling mode
HRV:
Heat exchange mode
VRV:
Fan mode
HRV:
Heat exchange mode
When air conditioner and HRV
unit are connected via duct
3P130767-1_En.fm Page 5 Wednesday, December 17, 2003 7:39 PM