Service manual

For FTK25J, FTK35J, FTX25J, FTX35J Si04-115
102 Removal Procedure
1.4 Removal of Switch Box, PC Board and Swing Motor
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step Procedure Points
"
Remove front grill.
1. Remove switch box.
1
Disconnect the
connection wires.
2
Disconnect connectors
(S1 and S7) of fan
motor.
"
Pay attention to the direction
of the retainer of the
thermister so that the
retainer will not touch the
harness (same as the
existing models.)
3
Disconnect one
connector (S6) of swing
motor.
4
Remove heat
exchanger thermistor.