Specifications

BENEFITS
100% FRESH AIR INTAKE POSSIBLE
Outdoor air processing units can be used exclusively to provide 100% fresh air into the building. Even if only partly used the
system reduces the load on the air conditioner by adjusting the outdoor air temperature via fixed discharge temperature
control.
LEAVING MAXIMUM FLOOR AND WALL SPACE FOR FURNITURE, DECORATION AND FITTINGS
WIDE OPERATION RANGE
The outdoor air processing unit can be installed practically anywhere. The unit
operates at outdoor ambients up to 43°C in cooling mode and down to -5°C in
heating mode.
HIGH STATIC PRESSURE
External static pressure (ESP) up to 225 Pa allows the use of extensive ductwork
runs and facilitates the use with flexible ducts of varying lengths. Ideal for use in
large areas.
BUILTIN DRAIN PUMP
A drain pump kit increases the reliability of the drain system
1
1
Drain pump kit available as accessory
CONNECTION CONDITIONS
› The total connected capacity of the standard indoor units and fresh air treatment units must be between 50% and
100% of the capacity of the air conditioning outdoor units. The connected capacity of the fresh air treatment units must
not exceed 30% of the capacity of the air conditioning outdoor units.
› A fresh air treatment unit can also be used exclusively. The connected capacity of the fresh air treatment unit must be
between 50% and 100% of the capacity of the air conditioning outdoor unit.
› Connectable outdoor units: - VRVIII Heat pump Optimised for heating (RTSYQ)
- VRVIII Heat pump High COP combination (RXYHQ)
- VRVIII Heat pump Small footprint combination (except 5HP unit) (RXYQ)
VRV III Series
Outdoor Units
20HP
Outdoor Air
Processing unit 5HP
Outdoor Air processing Unit
Indoor Unit
Indoor Unit
3x 5HP
Indoor Unit
Air Conditioning Outdoor Air Supply
FXMQ-MF
50°
40°
30°
20°
10°
0°
-10°
-5°C
43°C
20