User`s manual
OPTION LIST
3837
Heat Pump
No.
1 Cool/Heat selector
1-1 Fixing box
2 REFNET header
3 REFNET joint
RXYMQ4PV4A
KJB111A
KHRP26M22H (Max. 4 branch)
KHRP26M33H (Max. 8 branch)
KHRP26A22T
KRC19-26A
RXYMQ5PV4A RXYMQ6PV4A
5 Fixture for preventing overturning KPT-60B160
6
Wire fixture for preventing overturning
K-KYZP15C
4
KKPJ5F180
Central drain plug
Concealed Floor Standing Type
FXNQ20MA
1 Long life replacement filter
FXNQ25MA FXNQ32MA
FXNQ40MA
FXNQ50MA FXNQ63MA
KAFJ361K28 KAFJ361K45 KAFJ361K71
No.
Type
Item
Ceiling Suspended Cassette Type
Type
Item
CONTROL SYSTEMS
CONTROL SYSTEMS
Building Management System
•Interface unit to allow communications between VRV and BMS. Operation and monitoring of air-
conditioning systems through
LONWORKS
®
communication.
DMS504B51
4
3
•Expansion kit, installed on DMS502B51, to provide 2 more DIII-NET communication ports. Not usable
independently.
DAM411B513-1
•Enables ON/OFF command, operation and display of malfunction; can be used in combination with up to
4 units.
DPF201A515
•Enables temperature measurement output for 4 groups; 0-5VDC.DPF201A526
•Enables temperature setting input for 16 groups; 0-5VDC.DPF201A53
7
No. Item Model No. Function
*2 Interface for use in LONWORKS
®
•Interface unit to allow communications between VRV and BMS. Operation and monitoring of air-
conditioning systems through BACnet
®
communication.
DMS502B51
*1 Interface for use in BACnet
®
Optional DIII board
Contact/analogue
signal
Parallel interface
Basic unit
Temperature
measurement units
Temperature
setting units
•Air conditioner management system that can be controlled by personal computers.
DAM602B51
KJB411A
DAM602B52
256 units
DAM602B51
x
2512 units
DAM602B51
x
3768 units
DAM602B51
x
41024 units
intelligent Manager III
128 units
2
Number of
units to be
connected
HardwareBasic
•Expansion kit, installed on DMS502B51, to provide 16 more wattmeter pulse input points. Not usable
independently.
•External temperature sensor for intelligent Manager III.
DAM412B51
DAM101A51
Optional Di board
Optional DIII Ai unit2-4
•8 pairs based on a pair of On/Off input and abnormality input.DEC101A51Di unit2-5
3-2
1-1
1-4
1
Electrical box with earth terminal (4 blocks)
DCS601A52
1-1
•Additional 64 groups (10 outdoor units) is possible.
DCS004A511-3
•Monitors and controls the air conditioning system using the Internet and a Web browser application on a PC.
•Wall embedded switch box.
DCS601C51 •Air-Conditioning management system that can be controlled by a compact all-in-one unit.
Communication line
Note : *1.
BACnet
®
is a registered trademark of American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE).
*2. LONWORKS
®
is a registered trade mark of Echelon Corporation.
*3. Installation box for adaptor must be obtained locally.
DCS002C51
1-2
intelligent Touch
Controller
DIII-NET plus adaptor
Web
intelligent Touch Controller
PPD
Hardware
Hardware
Software
Basic
Option
•PPD: Power Proportional Distribution function
•4 pairs based on a pair of On/Off input and abnormality input.DEC102A51Dio unit2-6
2-1
2-2
2-3
•Power Proportional Distribution functionDAM002A51
Option
Software
2-1
•
Monitors and controls the air conditioning system using the Internet and a Web browser application on a PC.
DAM004A512-2
•ECONO (Energy saving functions.)DAM003A51
PPD
Web
ECONO2-3
•Interface between the central monitoring board and central control units.
DCS302A528
Unification adaptor for
computerised control
INDOOR UNITS
OUTDOOR UNITS
System Configuration
•Up to 64 groups of indoor units(128 units) can be connected, and ON/OFF, temperature setting and
monitoring can be accomplished individually or simultaneously. Connectable up to 2 controllers in one
system.
Note 2
DCS302CA61
Central remote controller2
•Up to 16 groups of indoor units (128 units) can be easily controlled using the large LCD panel. ON/OFF,
temperature settings and scheduling can be controlled individually for indoor units.
Note 3
DCS303A51
Residential central remote controller1
•Up to 16 groups of indoor units(128 units) can be turned, ON/OFF individually or simultaneously, and
operation and malfunction can be displayed. Can be used in combination with up to 8 controllers.
Note 2
DCS301BA61
Unified ON/OFF controller3
KJB212AAElectrical box with earth terminal (2 blocks)3-1
KEK26-1ANoise filter (for electromagnetic interface use only)3-2
KJB311AAElectrical box with earth terminal (3 blocks)2-1
DTA102A52
Interface adaptor for SkyAir-series5
DTA107A55
6
DTA103A51
Wiring adaptor for other air-conditioner7
No. Item Model No. Function
•Up to 1024 units can be centrally controlled in 64 different groups.
•Wiring restrictions (max. length: 1,000m, total wiring length: 2,000m, max. number of branches: 16)
apply to each adaptor.
DTA109A51
D -NET
Expander Adaptor
8
•Fixing plate for DTA109A51KRP4A92
Mounting plate8-1
•Adaptors required to connect products other than those of the VRV System to the high-speed DIII-NET
communication system adopted for the VRV System.
* To use any of the above optional controllers, an appropriate adaptor must be installed on the product unit to be
controlled.
For UAT
(
Y
)
-K
(
A
)
,FD-K
For SkyAir, FD
(
Y
)
M-FA, FDY-KA
FDYB-KA, FVY(P)J-A, FXUQ-MA
Central control adaptor kit
Notes: 1. Installation box for adaptor must be obtained locally.
2. For FXUQ-MAV1, an interface adaptor (DTA102A52) for the SkyAir series is necessary.
3. For residential use only. Cannot be used with other centralised control equipment.
•Programmed time weekly schedule can be controlled by unified control for up to 64 groups of indoor units
(128 units). Can turn units ON/OFF twice per day.
Note 2
DST301BA61
Schedule timer
4
Operation Control System Optional Accessories
No.
3
4
Remote controller
Wireless
Wired
Simplified remote controller (Exposed type)
5 Adaptor for wiring
6-1 Wiring adaptor for electrical appendices (1)
6-2 Wiring adaptor for electrical appendices (2)
Remote controller for hotel use (Concealed type)
7 Remote sensor (for indoor temperature)
9 External control adaptor for outdoor unit
Type
Item
Wired remote controller with weekly schedule timer
8 Installation box for adaptor PCB
2
1
Note: 1. Installation box is necessary for each adaptor marked .
2. Up to 2 adaptors can be fixed for each installation box.
5. Installation box is necessary for second adaptor.
6. Installation box is necessary for each adaptor.
3. Only one installation box can be installed for each indoor unit.
4. Up to 2 installation boxes can be installed for each indoor unit.
FXFQ-P
BRC7F634F
BRC1C62
BRC1D61
—
—
KRP1C63
KRP2A62
KRP4AA53
KRCS01-4B
10 Adaptor for multi tenant
— DTA114A61DTA114A61DTA114A61 ——
Note 2,3
KRP1H98
DTA104A62
FXZQ-M
BRC7E530W
KRP1BA57
KRP2A62
KRP4AA53
KRCS01-1B KRCS01-4B KRCS01-1B
Note 4,6
KRP1BA101
FXCQ-M
BRC7C62
KRP1B61
KRP2A61
KRP4AA51
Note 2,3
KRP1B96
DTA104A61
FXKQ-MA
BRC4C61
KRP1B61
KRP2A61
KRP4AA51
—
DTA104A61
FXDQ-PB
FXDQ-NB
BRC4C65
BRC2C51
BRC3A61
KRP1B56
KRP2A53
KRP4A54
Note 4,6
KRP1BA101
DTA104A53
FXSYQ-M
BRC4C62
KRP1B61
KRP2A61
KRP4AA51
Note 5
KRP4A91
FXDYQ-MA
BRC4C62
KRP1B61
KRP2A61
KRP4AA51
—
DTA104A61
FXMQ-P
BRC4C65
KRP1C64
KRP2A61
KRP4AA51
Note 2,3
KRP4A96
DTA104A61
FXHQ-MA
BRC7EA63W
—
—
KRP1BA54
KRP2A62
KRP4AA52
Note 3
KRP1CA93
DTA104A62
FXAQ-MA
BRC7EA618
—
KRP2A61
KRP4AA51
Note 2,3
KRP4AA93
DTA104A61
FXLQ-MA
FXNQ-MA
BRC4C62
BRC2C51
BRC3A61
KRP1B61
KRP2A61
KRP4AA51
—
DTA104A61
FXUQ-MA
BRC7CA528W
—
—
—
KRP2A62
KRP4AA53
KRP1BA97
—
No.
Replacement long-life filter1
2
3
4
5
Sealing member of air discharge outlet
(*1)
Decoration panel for air discharge
Vertical flap kit
L-shape piping kit
FXUQ71MA
KDBH49FA80
KDBT49FA80
KDGJ49FA80
KHFP49MA140
KDBH49FA140
KDBT49FA140
KDGJ49FA140
FXUQ100MA
FXUQ125MA
KAF495FA140
(*1): This option is necessary for setting up 2-way (opposing directional) airflow when the air conditioner is installed.
Note:
Type
Item