Service manual
6L(1 :LULQJ'LDJUDPVIRU5HIHUHQFH
$SHQGL[
)LHOG:LULQJ
5;<4a0<%
Main Switch
Switch
Fuse
Switch
Fuse
Outdoor Units
Indoor Units
Switch
Fuse
Switch
Fuse
Switch
Fuse
Power Supply
Notes:
1) All wiring, components and materials to be procured on
the site must comply with the applicable local and national
codes.
2) Use copper conductors only.
3) As for details, see wiring diagram.
4) Install circuit breaker for safety.
5) All field wiring and components must be provided by
licensed electrician.
6) Unit shall be grounded in compliance with the applicable local and national codes.
7) Wiring shown are general points-of-connection guides only and are not intended for
or to include all details for a specific installation.
8) Be sure to install the switch and the fuse to the power line of each equipment.
9) Install the main switch that can interrupt all the power sources in an integrated
manner because this system consists of the equipment utilizing the multiple power
sources.
2 Wires cable
(Tansmission Line)
(Tansmission Line)
2 Wires cable
2 Wires cable
(Power Line)
2 Wires cable
(Power Line)
2 Wires cable
(Power Line)
(Tansmission Line)
2 Wires cable
(Tansmission Line)
2 Wires cable
(Power Line)
2 Wires cable
3D040746