Service manual

SiBE06-708_C Main Functions
Function and Control 41
1.3 Airflow Direction Control
Wide-Angle
Louvers
The louvers, made of elastic synthetic resin, provide a wide range of airflow that guarantees a
comfortable air distribution.
Auto-Swing The following table explains the auto-swing process for cooling, dry, and heating :
Airflow Selection
Setting
Airflow direction can be set with the airflow selection switch.

Open the front panel.
Right and Left
(manual)
Upper air outlet
Lower air outlet
(R6827)
45
°
45°
(R6828)
45°
45°
Up and Down
Cooling / Dry Heating
Upward airflow limit
OFF
(R6831)
(R6829)
Upward airflow limit
ON
(R6832) (R6830)
25
°
90°
40°
90°
20
°
90°
90°
20
°
CAUTION
Before opening the front panel, be sure to stop the operation and turn the breaker off.
Do not touch the aluminum fins (indoor heat exchanger) inside of the indoor unit, as it
may result in injury.
Air is blown from the upper outlet only.
Front panel


The blow pattern is automatically decided
depending on mode and conditions.
(Recommended and factory set.)
(R17866)