Installation manual

English 14

English

Remove the ﬁ xing screws (2 pcs.), press the tabs (3 positions) using a ﬂ athead screwdriver, and remove the upper 7)

casing.

Remove the ﬁ xing screw (1 pc.) of both side, press the tabs (2 positions) using a ﬂ athead screwdriver, and remove the 8)

side casing on the pipe port cover removing side for the piping.

Remove the pipe port cover for the piping with reference to the slit.9)

Remove the

pipe port cover.

Frame

Casing

CAUTION

Remove either the left or right pipe port cover depending on which side the piping is located.•

After removing a pipe port cover, return the casing, air outlet cover, harness for receiver, service lid, and screw covers 10)

to their original positions.

01_EN_3P276870-1.indb 1401_EN_3P276870-1.indb 14 2/23/2011 5:04:18 PM2/23/2011 5:04:18 PM