Installation manual

English 12

English

Installing the indoor unit on the mounting plate5.

Remove the front panel and front grille.1)

Insert the 2)

drain hose into the socket of the drain pan. Fully insert the drain hose until it adheres to a seal of the

socket.

Drain pan

Seal

Drain hose

C Drain hose

For side piping

Before performing the side piping work, remove the pipe port cover on the side the pipe is routed.•

Open the screw covers on both sides of the air outlet cover using a ﬂ athead screwdriver.1)

Remove the ﬁ xing screws (2 pcs.) from the air outlet cover.2)

There is a service lid on the right side of the air outlet cover. Remove the screw, and open the service lid.3)

Remove the harness from the receiver.4)

01_EN_3P276870-1.indb 1201_EN_3P276870-1.indb 12 2/23/2011 5:04:15 PM2/23/2011 5:04:15 PM