Installation manual

English 8
English
Indoor Unit Installation Drawings
Be sure to install the indoor unit in accordance with the installation instructions below for any installation pattern.•
Air filters (upper)
Air filters (lower)
50mm or more
from wall
150mm or more
from wall
Screws (field supply: M4 × 25L)
Install the indoor unit where there is no obstacle above the unit.
Obstacles affect the air current distribution, and an adequate heating or
cooling effect cannot be obtained.
70 to 120mm from floor
If these restrictions on installation are not observed,
the room temperature distribution may be affected.
Filter frame
Tab
Claw
Titanium apatite
photocatalytic
air-purifying filter
Air filter
B Titanium apatite photocatalytic
air-purifying filter (2)
Before screwing the
remote controller
holder to the wall,
make sure that
control signals are
properly received
by indoor unit.
E Wireless remote controller
F Remote controller
holder
Fixing screws for
remote controller holder
(field supply: M3 × 20L)
A Mounting plate
01_EN_3P276870-1.indb 801_EN_3P276870-1.indb 8 2/23/2011 5:04:10 PM2/23/2011 5:04:10 PM