Installation manual

7 English
Indoor Unit Installation Patterns
The indoor unit can not be installed at a position where it directly comes in contact with the oor.
There are two installation patterns shown below as a standard installation speci cation of the indoor unit.
Be sure to install the indoor unit on a wall that can bear the weight of the unit adequately for any installation pattern.
Exposed installation Half concealed installation
For half concealed installation, please refer to page 20 and
21.
CAUTION
Firmly secure the unit to the wall so that a gap does not form between the back of the unit and the wall.
01_EN_3P276870-1.indb 701_EN_3P276870-1.indb 7 2/23/2011 5:04:10 PM2/23/2011 5:04:10 PM