Service manual

3-31
LED DISPLAY
LIGHT-OFF SETTING
INPUT POWER
SETTING
HORSEPOWER
SETTING
S
S
S
S
DEHUMIDIFICATION
COIL ON/OFF
SETTING
COMPRESSOR
UNLOADING
SYSTEM SETTING
S
S
To set the power input:
Select "Sing
" or "dUAL" on the LED when the LCD displays "OC-SET" .
Whenever the or key is pressed, the indication of "Sing
" or "dUAL" is
changed. Press the key to determine the setting.
For the unit, select "Sing", and press key to determine the setting.
To set the "panel (LED) lighting off" function ON/OFF:
Select "ON" (provided) or "OFF
" (not provided) on the LED when the LCD
displays "dISP" .
Whenever the or key is pressed, the indication of "ON" or "OFF
" is
changed. Press the key to determine the setting.
Note: When the 0/CHART key is pressed twice when the "panel (LED) lighting
off" function is ON, the lights on the LED panel are turned off.
To set the compressor unloading system:
Select "33 (provided)" or "100
(not provided)" on the LED when the LCD
displays "COMP".
Whenever the or key is pressed, the indication of "33" or "100
" is changed.
Note: This "33" setting is applicable for LXE10D type only.
To set the dehumidification coil ON/OFF:
Select "ON
(provided)" or "OFF (not provided)" on the LED when the LCD
displays "REHEAT".
Whenever the or key is pressed, the indication of "ON
" or "OFF" is
changed. Press the key to determine the setting
To set the horse power setting:
Select "5" or "10
" on the LED when the LCD displays "HP" (Horse power).
Whenever the or key is pressed, the indication of "5" or "10
" is
changed. Press the key to determine the setting.