Service manual

3-13
5. Dehumidification mode setting
Dehumidification mode can be executed in this mode (M. Dehumidification mode control in 2.5.4).
When "Dehumidification" is set to "on", it is possible to change the following set from default.
qInside humidity : 95% (Default) ~60% RH
wEvaporator fan speed : Alterating (H-L) (default) / High / Low
When Full PTI is executed, settings of "Bulb" and "Dehumidification" are reset to default
automatically. (=Bulb : off, Dehumidification : off)
IMPORTANT