Service manual

SiBE041134 Operation Manual
Operation Manual 43
2.3 Adjusting the Airflow Direction and Rate
Adjusting the Airflow Direction
and Rate
You can adjust the airflow direction to increase your comfort.
 To start auto swing
 To set the flap at desired position
 To adjust the louvers at desired position
Upper and lower airflow direction
Press .
• “ ” is displayed on the LCD.
• The flap (horizontal blade) will begin to swing.
• This function is effective while flap is in auto swing mode.
Press when the flap has reached the
desired position.
• “ ” disappears from the LCD.
Hold the knob and move the louvers.
• You will find a knob on the left-side and the right-side
blades.
• When the unit is installed in the corner of a room, the
direction of the louvers (vertical blades) should be facing
away from the wall.
If they face the wall, the wall will block off the wind,
causing the cooling (or heating) efficiency to drop.
• If the flap is in the way, press on the remote controller to move the flap out of
the way and then adjust the louvers.