Service manual

Indoor Unit SiBE041134
120 Removal Procedure
4
Remove the screw of
the wire retaining plate.
5
Remove the screws of
the terminal board and
disconnect the
connecting wires.
 Connecting wires
(1): black
(2): white
(3): red
( ): yellow / green
6
Pull out the indoor heat
exchanger thermistor.
 Take care not to lose the clip
of thermistor.
2. Remove the electrical box.
1
Remove the screw and
release the ground
wire.
Step Procedure Points
(R12044)
Terminal board
(R11639)
Connecting
wires
(R12045)
Indoor heat exchanger thermistor
Clip
(R11268)
Thermistor
Screw
Ground
wire
(R16648)