Service manual

SiBE12-816_D SA Indoor Unit - FFQ Series
Operation Manual 172
Operation manual
3
BRC1D528
Remote controller
4PW23717-1
12 MAXTEMPERATURE IMUM SET
13 MINIMUM SET TEMPERATURE
14 SCHEDULE TIMER ICON
This icon indicates that the schedule timer is enabled.
15 ACTION ICONS
16 OFF ICON
17 INSPECTION REQUIRED and
These icons indicate that inspection is required.
Consult your installer.
18 SET TEMPERATURE DISPLAY
19 SETTING
Not used, for service purposes only.
20 AIR FLOW DIRECTION ICON
21 NOT AVAILABLE
22 FAN SPEED ICON
This icon indicates the set fan speed.
23 DEFROST/HOTSTART MODE ICON
24 AIR FILTER CLEANING TIME ICON
This icon indicates the air filter must be cleaned.
Refer to the manual of the indoor unit.
25 ELEMENT CLEANING TIME ICON
26 VENTILATION MODE BUTTON
27 VENTILATION AMOUNT BUTTON
28 INSPECTION/TEST OPERATION BUTTON
Not used, for service purposes only.
29 PROGRAMMING BUTTON
This button is a multi-purpose button.
The maximum set temperature indicates the
maximum set temperature when in limit operation.
The minimum set temperature indicates the minimum
set temperature when in limit operation.
These icons indicate the actions for each day of the
schedule timer.
This icon indicates that the OFF action is selected
when programming the schedule timer.
This indicates the current set temperature of the
installation (not shown in LIMIT operation or in FAN or
DRY mode).
This icon indicates the air flow direction (only for
installations with motorised air flow ßaps).
is displayed whenever a non-installed option
is addressed or a function is not available.
This icon indicates that the defrost/hotstart mode is
active.
This icon indicates the element must be cleaned
( only).
The ventilation mode button operates the ; refer
to the manual for more details.
This button sets the ventilation amount; refer to the
manual for more details.
Depending on the previous manipulations of the user,
the programming button can have various functions.