Service manual

SiUS041111 Outdoor Unit: 15/18/24 Class
Removal Procedure 195
4 Release the fan
motor lead wire from
the groove and the 2
hooks of the partition
plate.
 The harnesses of [S70] and
[S20] cross each other.
5 Remove the nut of
the outdoor fan.
 Nut size: M6
 When reassembling, align
mark of the outdoor fan with D-
cut section of the motor shaft.
Step Procedure Points
(R14304)
(R14448)
[S20]
(R14291)
Outdoor fan
10 mm
(R12236)
(R14292)