Service manual

SiUS041111 Outdoor Unit: 09/12 Class
Removal Procedure 175
2. Remove the thermistors.
 Pay attention so as not to lose
the fixture for thermistor.
 When reassembling, do not
insert the thermistor up to the
dent of fixture.
1
Release the discharge
pipe thermistor.
2
Release the outdoor
heat exchanger
thermistor.
3
Lift the hook with a flat
screwdriver, and
remove the electronic
components mounting
plate.
Step Procedure Points
Discharge pipe thermistor
(R11765)
Dent
Fixture
(R11740)
(R11766)
Outdoor heat
exchanger thermistor
Electronic components mounting plate
(R11767)