Installation manual

ON/OFF
5
Name of Parts
Indoor Unit
Air inletFront panel
Air outlet
Fins (vertical blades)
The fi ns are inside of the air •
outlet.
Page 13
Louver (horizontal blade)
Page 13
OPERATION lamp (green)
TIMER lamp (yellow)
Page 18,19
Signal receiver
It receives signals from the remote •
controller.
When the unit receives a signal, you •
will hear a beep sound.
Case Sound type
Operation start beep-beep
Setting changed beep
Operation stop long beep
Display
Indoor unit ON/OFF switch
Press this switch once to start operation.•
Press once again to stop it.
The operation mode refer to the following table.•
Model Mode Temperature setting Airfl ow rate
COOLING ONLY COOL 72°F (22°C) AUTO
HEAT PUMP AUTO 77°F (25°C) AUTO
This switch is useful when the remote controller is missing.•
Model name
plate
Panel tab
Room temperature
sensor
It detects the air temperature •
around the unit.
01_EN_3P272441-1.indd 501_EN_3P272441-1.indd 5 12/14/2010 1:39:51 PM12/14/2010 1:39:51 PM