Service manual

SiEBE12-625 Outdoor Unit (68 / 75 Class)
Removal Procedure 285
5
Take off the putty, and
remove each
thermistor.
 Place the thermistor so that
its end comes up to the end
of the presser spring.
 Be careful not to lose the
presser spring for the
discharge pipe thermistor.
6
Remove the wire
harness.
S90:
 Outdoor air thermistor (Blue)
 Heat exchanger thermistor
(Gray)
 Discharge pipe thermistor
(Black)
S92: Gas pipe thermistor
 Room A (Black)
 Room B (Gray)
 Room C (Brown)
 Room D (Red)
S93: Liquid pipe thermistor
 Room A (Black)
 Room B (Gray)
 Room C (Yellow)
 Room D (Blue)
Step
Procedure Points
Thermistor
Thermistor
presser
spring
Pipe