Service manual

SiEBE12-625 Instruction
List of Functions 151
 To adjust the angle of the INTELLIGENT EYE sensor
“INTELLIGENT EYE” is useful for Energy Saving
Notes on “INTELLIGENT EYE”
CAUTION
• You can adjust the angle of the INTELLIGENT
EYE sonsor to increase the detection area.
(Adjustable angle: 15° to right and left of
centre)
• Gently push and slide the sensor to adjust the
angle.
• After adjusting the angle, wipe the sensor
gently with a clean cloth, being careful not to
scratch the sensor.
INTELLIGENT EYE
sensor
Moving the sensor to the rightMoving the sensor to the left
 Energy saving operation
• Change the temperature –2°C in heating / +2°C in cooling / +1°C in dry mode from set temperature.
• Decrease the air flow rate slightly in fan operation. (In FAN mode only)
• Application range is as follows.
• Sensor may not detect moving objects further than 5m away. (Check the application range)
• Sensor detection sensitivity changes according to indoor unit location, the speed of passersby, temperature range, etc.
• The sensor also mistakenly detects pets, sunlight, fluttering curtains and light reflected off of mirrors as passersby.
• INTELLIGENT EYE operation will not go on during powerful operation.
• Night set mode will not go on during you use INTELLIGENT EYE operation.
80˚
50˚
5m
50˚
5m
Vertical angle 90˚
(Side View)
Horizontal angle 110˚
(Top View)
• Do not place large objects near the sensor.
Also keep heating units or humidifiers outside the sensor’s detection area. This sensor can detect objects it shouldn’t as well
as not detect objects it should.
• Do not hit or violently push the INTELLIGENT EYE sensor. This can lead to damage and malfunction