Service manual

Instruction SiEBE12-625
142 List of Functions
 Air flow selection
• make air flow selection acoording to what suits you.
When setting the air flow selection switch to .
• Air conditioner automatically decides the appropriate blowing pattern depending on the
operating mode/situation.
• During Dry mode, so that cold air does not come into direct contact with people, air is blown
upper air outlet.
When setting the air outlet selection switch to .
• Regardless of the operating mode or situation, air blows from the upper air outlet.
• Use this switch when you do not want air coming out of the lower air outlet. (While sleeping
etc...)
CAUTION
Operating mode Situation Blowing pattern
COOL mode
• When the room has become fully
cool, or when one hour has
passed since turning on the air
conditioner.
• So that air does not come
into direct contact with
people, air is blown under
air outlet, room
temperature is equlides.
• At start of operation or other
times when the room is not fully
cooled.
• Air is blown from the upper
and lower air outlets for
high speed cooling during
COOL mode, and for filling
the room with warm air
during HEAT mode.
HEAT mode
• At times other than below.
(Normal time.)
• At start or when air temperature
is low.
• So that air does not come
into direct contact with
people. Air is blown upper
air outlet.
• Do not try to adjusting the flap by hand.
• When adjusting by hand, the mechanism may not operate properly or condensation may drip from air outlets.