Service manual

Instruction SiEBE12-625
140 List of Functions
Notes on flap and louvers angles.
 To adjust the vertical blades (louvers)
• When adjusting the louver, use a robust and
stable stool and watch your steps carefully.
• Hold the knob and move the louvers.
• (You will find a knob on the left side and the
right side blades.)
• Unless [SWING] is selected, you should set the flap at a near-horizontal
angle in COOL or DRY mode to obtain the best performance.
• In COOL or DRY mode, if the flap is fixed at a downward position, the flap
automatically moves in about 60 minutes to prevent condensation on it.
 ATTENTION
• Always use a remote control to adjust the flap angle.
If you attempt to move it forcibly with hand when it is swinging, the
mechanism may be broken.
• Be careful when adjusting the louvers. Inside the air outlet, a fan is
rotating at a high speed.
FAN
HEAT
COOL
DRY