Service manual

Instruction SiEBE12-625
112 List of Functions
 Oudoor Unit
 Indoor Unit
 Outdoor Unit
Appearance of the outdoor unit may differ from some models.
1. Air filter
2. Air purifying filter with photocatalytic
deodorizing function:
• These filters are attached to the inside of
the air filters
3. Air inlet
4. Front grille
5. Grille tab
6. INTELLIGENT EYE sensor:
• It detects the movements of people and
automatically switches between normal
operation and energy saving operation.
7. Display
8. Air outlet
9. Flap (horizontal blade)
10. Louvers (vertical blades):
• The Louvers are inside of the air outlet.
11. Operation lamp (green)
12. TIMER lamp (yellow)
13. HOME LEAVE lamp (red):
Lights up when you use HOME LEAVE
Operation.
14. Indoor unit ON/OFF switch
• Push this switch once to start operation.
Push once again to stop it.
:
• The operation mode refer to the following
table.
• This switch is useful when the remote
control is missing.
15. Packaging materials: 50 class only
• If any packaging materials are included,
please remove before operating
16. Room temperature sensor:
• It senses the air temperature around the
unit.
17. Signal receiver:
• It receives signals from the remote control.
• When the unit receives a signal, you will
hear a short beep.
• Operation start ..............beep-beep
• Settings changed..........beep
• Operation stop ..............beeeeep
18. Air inlet: (Back and side)
19. Air outlet
20. Refrigerant piping and inter-unit cable
21. Drain hose
22. Earth terminal:
• It is inside of this cover.
20
21
22
19
18
Mode Temperature
setting
Air flow
rate
FTKS COOL 22°C AUTO
FTXS AUTO 25°C AUTO