User`s manual

16 17
See page 14
See page 14
See page 14
See page 14
See page 14
See page 14
See page 10
See page 15
See page 14
See page 13
See page 13
See page 14
See page 10
See page 11
See page 11
See page 15
See page 12
Function Dictionary
Comfortable Airflow Comfort Control
Lifestyle Convenience
Cleanliness
Timers
Worry Free
Power-Airflow Dual Flaps can flatten out during cooling
operation to deliver cool air to the corners of a room. The
flaps can direct warm air straight down to the floor during
heating operation.
The smoothly curved Wide-Angle Louvers provide wide
airflow coverage for effective operation no matter where
the indoor unit is placed in a room.
This function automatically moves the flaps up and down
to distribute air across a room.
Horizontal Auto-Swing automatically moves the louvers
to the left and right to cover a room with cool/warm air.
This function combines Vertical and Horizontal Auto-
Swing to circulate a cloud of cool/warm air right to the
corners of even large spaces.
The microprocessor automatically controls fan speed to
adjust the room temperature to the set temperature.
This function automatically reduces the level of humidity
while maintaining the preset room temperature.
Indoor unit operating sound levels are decreased by 2 or
3 dB from the Low setting fan speed using the wireless
remote controller.
Outdoor unit operating sound levels are decreased by 3 dB
from the rated operation sound using the wireless remote
controller.
Intelligent Eye with its infrared sensor automatically
controls air conditioner operation according to human
movement in a room. When there is no movement, it
adjusts the temperature by 2 C for energy savings of
up to 20% for cooling operation and 30% for heating
operation.
This function is convenient for boosting cooling/heating
performance for a 20-minute period both when you first
turn on your air conditioner or want to quickly change the
room temperature.
This mode limits maximum running current and power
consumption to 70% of normal operation, while maintaining
maximum capacity at 80%. This improves operating
efficiency and also prevents circuit breakers from being
overloaded.
Home Leave Operation continues operation to prevent a
room from becoming too hot or cold, while you are
sleeping or out of your home. Select any temperature
from 18 to 32 C for cooling operation and 10 to 30 C for
heating operation.
There is a second On/Off switch on the body of the indoor
unit to prevent any problems if the wireless remote
controller is misplaced.
The air filter is finished with a coating that suppresses the
growth of mould on its surface.
The flat panel models can be cleaned with only the single
pass of a cloth across their smooth surface. The flat
panel can also be easily removed for more thorough
cleaning.
Mould-Proof Operation automatically runs fan-only
operation for 1 hour when cooling or dry operation is
stopped. This airflow prevents the generation of mould
and mould odours inside the indoor unit.
This timer can be preset to start and stop at any time
within a 24-hour period. The air conditioner is started/
stopped simply by pressing the On/Off timer button on
the wireless remote controller.
Pressing the Off timer button automatically selects Night
Set Mode. This function prevents any sudden change in
room temperature by gently raising/lowering the
temperature before the air conditioner stops, so you can
sleep comfortably.
The air conditioner memorises the settings for mode,
airflow, temperature, etc., and automatically returns to
them when power is restored after a power failure.
Malfunction codes are shown on the digital display panel
of the wireless remote controller for fast and easy
maintenance.
The outdoor unit’s heat exchanger fins are processed
using a special anticorrosion treatment. The surface is
covered with a thin acrylic resin layer to enhance the fins’
resistance to acid rain and salt corrosion.
This filter contains the new photocatalytic material
titanium apatite. While the filter’s micron-level fibres trap
dust, this photocatalyst adsorbs and decomposes
bacteria and viruses, and breaks down mould and
odours. The filter can be used for up to 3 years with
proper maintenance.
This function automatically selects cooling or heating
operation mode based on the room temperature at
start-up.
Others
After defrosting or when starting heating operation, air is pre-
heated before discharge to prevent uncomfortable cold drafts.
During low outdoor temperatures, this function pre-heats the
compressor to shorten the time required to discharge warm air.
Before starting heating operation, a sensor checks for frost in
the outdoor unit and performs automatic defrosting if necessary
so that only warm air is discharged.
* Available with the heat pump type.
Functions
Models
FTK(X)S
25/35E
FTK(X)S
50/60/71F
Function List
Wall-mounted type
Power-Airflow Dual Flaps
Wide-Angle Louvers
Vertical Auto-Swing (up and down)
Horizontal Auto-Swing (left and right)
3-D Airflow
Auto Fan Speed
Programme Dry Function
Indoor Unit Quiet Operation
Outdoor Unit Quiet Operation
Intelligent Eye
Inverter Powerful Operation
Econo Mode
Home Leave Operation
Indoor Unit On/Off Switch
Mould-Proof Air Filter
24-Hour On/Off Timer
Night Set Mode
Auto-Restart after Power Failure
Self-Diagnosis with Digital Display
Anticorrosion Treatment of Outdoor
Heat Exchanger Fins
Wipe-Clean Flat Panel
Mould-Proof Operation
Titanium Apatite Photocatalytic
Air-Purifying Filter
Titanium Apatite
Photocatalytic
Air-Purifying Filter
Automatic Operation
Hot-Start Function
Quick Warming Function
Comfort Control
Automatic Defrosting
Power-Airflow
Dual Flaps
Comfortable Airflow
Wide-Angle Louvers
Comfort Control
Intelligent Eye
Programme Dry
Function
Vertical Auto-Swing
(up and down)
Indoor Unit Quiet
Operation
Inverter Powerful
Operation
Lifestyle Convenience
Indoor Unit On/Off
Switch
Cleanliness
24-Hour On/Off Timer
Timers
Night Set Mode
Auto-Restart after
Power Failure
Anticorrosion Treat-
ment of Outdoor Heat
Exchanger Fins
Worry Free
Wipe-Clean Flat Panel
Econo Mode
Mould-Proof
Operation
3-D Airflow
Home Leave
Operation
Self-Diagnosis with
Digital Display
Mould-Proof Air Filter
Auto Fan Speed
Horizontal Auto-Swing
(left and right)
Outdoor Unit
Quiet Operation
Automatic Operation*
DC Inverter