Specifications

11
12
Inverter Powerful Operation
Comfort Airflow Mode
Heat exchanger fin
Hydrophilic film
Aluminium
Corrosion-resistant
acrylic resin
Time
Cooling
60 minutes
Set temp. before
Off timer begins
to operate
+0.5 C
Off timer turns on Off timer stops air conditioner
Comfortable Airflow
Lifestyle Convenience
Worry Free
Indoor Unit On/Off Switch
The louvres can be adjusted
by hand for FTKS25/35D
and with the wireless
remote controller for
FTKS50B, 50/60G and 71H.
One push!!
Push again!!
Start Home Leave
Operation simply by
pushing its button on the
remote controller.
When you are out of
your home, your air
conditioner prevents
large rises in the indoor
temperature by
continuing to operate
using Home Leave
Operation settings.
When you return, you will
be greeted by an air-
conditioned room. Just
push the HOME LEAVE
button again to return to
your previous settings.
A long piping length gives installation flexibility.
Installation is possible even if there is no space for the
outdoor unit near the indoor unit.
Installation Flexibility
Max. piping length
25 m 15 m
FTKS25D/RKS25G
FTKS35D/RKS35G
FTKS50B/RKS50B
FTKS50G/RKS50G
FTKS60G/RKS60G
FTKS71H/RKS71H
30 m 20 m
Max. height difference
During operation, 23 C for the room
temperature setting, and 28 C for
the Home Leave setting.
Cooling: the flaps flatten out during operation so that cool air slides off to
reach the corner of the room.
Cross section of anticorrosion-treated fin
Comfort Airflow Mode prevents
uncomfortable drafts from blowing
directly on to your body. With
this function, when you press the
COMFORT button during
operation, the flap moves upward
to prevent direct cold drafts.
Comfor Airflow Mode is available for FTKS71H
only.
Inverter Powerful Operation boosts cooling performance
for a 20-minute period. This is
convenient both when you first
turn on your air conditioner
and when you want to quickly
change the temperature
during operation.
Power-Airflow Dual Flaps and Wide-Angle Louvres work
in tandem to precisely control both vertical and
horizontal airflow for distribution of air.
Wide-Angle Louvres
Power-Airflow Dual Flaps
From a corner
to the centre
Power-Airflow Dual Flaps
Wide-Angle Louvers
Covers even
a spacious room
Vertical Auto-Swing automatically moves the flaps up
and down and Horizontal Auto-Swing automatically
moves the louvres to the left and right. 3-D Airflow
combines Vertical and Horizontal Auto-Swing to circulate
air to every part of a room for uniform cooling of even
large spaces.
Horizontal Auto-Swing and 3-D Airflow
are available for FTKS50B, 50/60G
and 71H.
Vertical Auto-Swing (up and down)
Horizontal Auto-Swing (left and right)
3-D Airflow
The unit can be conveniently started
manually in the event the wireless
remote controller is misplaced or
the wireless remote controller
batteries are not charged.
Cooling operation: Room temperature is raised by 0.5 C after 60 minutes.
Pressing the Off timer button automatically selects Night
Set Mode. This function prevents excessive cooling for
your pleasant sleep. Room temperature is raised by 0.5 C
after 60 minutes for cooling operation.
Night Set Mode
Indoor Unit On/Off Switch
23 C
28 C
23 C
Home Leave Operation prevents large rises in the
indoor temperature by continuing operation* while you
are sleeping or out of your home. This means that an
air-conditioned welcome awaits when you wake or
return. It also means that the indoor temperature can
quickly return to your favourite comfort setting.
* Home Leave Operation can be set at any temperature from 18 to 32 C.
Home Leave Operation is available for FTKS50B and FTKS50/60G.
The outdoor unit’s heat exchanger fins are processed
using a special anticorrosion treatment. The surface is
covered with a thin acrylic resin layer to enhance the
fins’ resistance to acid rain and salt corrosion. A
hydrophilic film layer also prevents rust caused by the
run off of water droplets.
Anticorrosion Treatment of Outdoor
Heat Exchanger Fins
Home Leave Operation