Specifications

Functions of Cooling Only Models Si01-406
26 Functions and Control
1.6 Signal Receiving Sign
When the indoor unit receives a signal from the remote controller, the unit emits a signal
receiving sound.
1.7 ON / OFF Button on Indoor Unit
The unit can be turned ON by the button on the front panel. This is convenient when the remote
controller cannot be found or when the batteries are exhausted.
Press the button again to turn the unit OFF.
The unit runs as follows.
1.8 Filters
1.8.1 Mold Proof Air Filter
The filter net is treated with mold resisting agent TBZ (harmless, colorless, and odorless). Due
to this treatment, the amount of mold growth is much smaller than that of normal filters.
1.8.2 Air Purifying Filter with Photocatalytic Deodorizing Function
This filter incorporates the benefits the Air Purifying Filter and Photocatalytic Deodorizing Filter
in a single unit. Combining the two filters in this way increases the active surface area of the
new filter. This larger surface area allows the filter to effectively trap microscopic particles,
decompose odours and deactivate bacteria and viruses even for the high volume of air required
to air-condition large living rooms. The filter can be used for approximately 3 years if periodic
maintenance is performed.
Operation mode Cool
Air flow rate Auto
Set temperature 22°C