Specifications

Si01-406 Functions of Cooling Only Models
Functions and Control 25
1.4 Air Flow Rate Control
In cooling operation, if automatic setting has been selected for air flow rate, the wind flow is
determined according to the room temperature and the set temperature.
1.5 Power-Airflow Dual Flaps, Wide-Angle Louvers, and
Auto-Swing
Power-airflow
Dual Flaps
The large flaps send a large volume of air downwards to the floor. The flap provides an optimum
controlled area in cooling and dry mode.
Cooling Mode
During cooling mode, the flap retracts into the indoor unit. Then, cool air can be blown far and
pervaded all over the room.
Wide-Angle
Louvres
The louvres, made of elastic synthetic resin, provide a wide range of airflow that guarantees a
comfortable air distribution.
Auto-Swing The following table explains the auto-swing process for cooling, dry and fan :
+2.0˚C
+1.0˚C
+2.5˚C
+1.5˚C
Difference between room
and set temperature
M
M
L
Set temperature
L
M
ML
(R3093)
Vertical Swing (up and down)
Horizontal Swing
(right and left)
Cooling Dry Heating, Fan
FT25/35CV1A
FT50/60CV1A
0˚
25˚
0˚
25˚
(R3207)
10˚
45˚
10˚
45˚
(R3208)
50˚
50˚
(R2817)
(manual)
10˚
40˚
10˚
40˚
(R2814)
5˚
35˚
5˚
35˚
(R2815)
5˚
55˚
5 ˚
55˚
(R2816)
50˚
50˚
(R2817)
(manual)