Service manual

Instruction SiBE05-312

54 System Configuration

■

To adjust the vertical blades

(louvres)

•

When adjusting the louvre, use a robust and stable stool and

watch your steps carefully.

Hold the knob and move the louvres.

(You will find a knob on the left side and the right side blades.)

Notes on flap and louvres angles

•

Unless [SWING] is selected, you should set the

flap at a near- horizontal angle in COOL or DRY

mode to obtain the best performance.

•

In COOL or DRY mode, if the flap is fixed at a

downward position, the flap automatically moves

in about 60 minutes to prevent condensation on it.

■

■■

■

ATTENTION

•

Always use a remote controller to adjust the flap

angle.

If you attempt to move it forcibly with hand when it

is swinging, the mechanism may be broken.

•

Be careful when adjusting the louvres. Inside the

air outlet, a fan is rotating at a high speed.

DRY

COOL

FAN

HEAT