Service manual

ESIE03–01 Specifications
Part 1 – System Outline 1–57
3
1
4
5
3.7 FDYP
Technical
specifications
The table below contains the technical specifications.
Electrical
specifications
The table below contains the electrical specifications.
Specification FDYP125B7V1
Heat exchanger Rows x stages x fin pitch 3 x 14 x 1.75 mm
Face area 0.338 m²
Tube type Hi-XA
Fin type MLH7 fin hydrophilia
Fan Nominal air flow (cooling) 43 m³/min
Fan motor model DPA216-178NB
Fan speed 3 steps
Drive Direct drive
Static external pressure (50/60
Hz)
0-150 Pa
Refrigerant circuit Type R407C
Safety and functional devices See page 1–63 and 3–18
Air filter Filter class Eurovent 4/5 (EU2), EN
779 5G2)
Max. temperature 100°C
Cleaning Hot water 30-40°C or
compressed air
Temperature control Computerized control
Insulation
Sound absorbing Flame and heat resistant
foamed felt
Weight 59 kg
Specification FDYP125B7V1
Unit Phase 1~
Voltage 230 V
Frequency 50 Hz
Fan motor
No. of motors x output 500 W