Service manual

Specifications ESIE03–01
1–50 Part 1 – System Outline
3
1
1
4
5
3.3 RP100 and RP125
Technical
specifications
The table below contains the technical specifications.
Electrical
specifications
The table below contains the electrical specifications.
Specification RP100L7V1 Rp100L7W1 Rp125L7W1
Compressor
Model x No. JT125FA-V1N x1 JT125FA-YE x 1 JT160FA-YE x 1
Type Hermetically sealed scroll type
Crankcase heater —
Refrigerant oil type DAPHNE FVC68D
Speed rpm
Oil charge 1500 cc
Outdoor
Heat exchanger
Length 859 mm
Rows x stages x fin pitch 2 X 52 X 2.0 mm
No of passes 10
Face area 0.983 m²
Tube type HI-XSS Cooling tube
Fin type Non sym. waffle louvre
Empty tubeplate hole 0
No of fans 1 2
Fan
Nominal air flow (230V) cooling 55 m³/min 89 m³/min
Fan motor model P47L11S P47L11S x 2
Fan speed 3 steps
Refrigerant circuit
Type R407C
Charge 3.7 kg
Safety and functional devices See page 1–63 and 3–19
Heat insulation Both liquid and gas pipes
Weight 100 kg 99 kg 104 kg
Specification RP100L7V1 Rp100L7W1 Rp125L7W1
Unit
Phase 1~ 3N~
Voltage 230 V 400 V
Frequency 50 Hz
No. of wire connections 3 wires for power supply
(including earth wire)
5 wires for power supply
(including earth wire)
4 wires for connection with indoor (including earth wire)
Nominal running current
(cooling)
See electrical data
Max. running current See electrical data
Power supply intake Outdoor unit only
Compressor Phase 1~ 3~
Voltage 230 V 400 V
Starting method Direct
No. x motor output 1 x 3000 W 1 x 3750 W
Fan motor Phase 1~
Voltage 230 V
No. of motors x output 90 W 85 +65 W