Service manual

ESIE03–01 Disassembly and Maintenance: Indoor Units
Part 5 – Disassembly and Maintenance 5–59
3
5
1
5
How to remove the
Drain Pump
:
Step Action
1 Drain pump is located at piping side. Cut clamp material of hose, and disconnect hose
from pump.
2 Remove four screws to dismount drain pump.
3 Dismount drain pump by pulling it down.
Caution
When reconnect drain hose with the pump,
secure hose at joint using clamping material-
such as Tielap. (Clamping material should be
normally included in the stock items.)
Drain pump
Clamp material
(Tielap)
Float switch
Joint port for
drain hose
Screws
(four locations)
Drain pump