Service manual

Disassembly and Maintenance: Indoor Units ESIE03–01
5–54 Part 5 – Disassembly and Maintenance
3
1
5
5
How to remove the
Fan Motor
:
Step Action
1 Removing fan motor: a. Disconnect connector.
b. Remove lead wire retaining plate.
2 Remove screws for mounting fan motor.
Caution
Fan motor can be removed without
removing the lead wire retaining plate.
However, when washing the heat exchanger,
this plate should be removed and protect the
lead wires.
Lead wire
retaining plate
P FUY71FJV1: Three screws
P FUY100/125FJV1: Four screws