Service manual

Disassembly and Maintenance: Indoor Units ESIE03–01
5–52 Part 5 – Disassembly and Maintenance
3
1
5
5
3 Bell mouth is mounted with tree screws.Loosen a screw located at diagonal position to
the pipings and remove other two screws.
4 Remove bell mouth by sliding to piping direction.
5 To dismount fan, remove washer based nut using double-ended wrench.
Step Action
Remove this screws
Loosen this screw
To remove bell mouth,
loosen this screw and slide
bell mouth to right side