Service manual

Disassembly and Maintenance: Indoor Units ESIE03–01
5–38 Part 5 – Disassembly and Maintenance
3
1
5
5
How to remove the
Horizontal Blade
6 Slide the PC board to the left away from the tabs on the right, and remove the PC board.
Step Action
Step Action
1 Gently bend the support plate located at the center of the horizontal blade, and detach the
center shaft. (Two shafts provided on Types 140 and 160.)
Reassembling precautions
The shaft at the right end of the horizon-
tal blade is cut in D shape. Fit this
D-shaped end to the D-profiled bearing.
Reattach the horizontal blade at the
right side first.