Service manual

ESIE03–01 Field settings

Part 4 – Commissioning and Test Run 4–9

Part 4

2 Field settings

2.1 What Is in This Chapter?

Introduction This chapter contains the following information:

P How to change the field settings

P The field settings

P The factory settings.

Overview This chapter contains the following topics:

Topic See page

2.2–How to Change the Field Settings with the Wired Remote Controller 4–10

2.3–How to Change the Field Settings with the Wireless Remote Controller 4–12

2.4–Overview of the Field Settings of the Indoor Units 4–13

2.5–Overview of the Factory Settings of the Indoor Units 4–14

2.6–Setting the Ceiling Height 4–15

2.7–Setting the Filter Counter 4–16

2.8–MAIN/SUB Setting when Using Two Remote Controllers 4–17

2.9–Setting the Centralized Group No. 4–18

2.10–Field settings when using a spare part PCB of Sky-Air L-series outdoor unit 4–20

2.11–The Field Setting Levels 4–23

2.12–Overview of the Field Settings: R(Y)P71-125L 4–26

2.13–Jumpers 4–28

2.14–DIP switch DS1 4–29

2.15–DIP switch DS2 4–30