Service manual

Error Codes: System Malfunctions ESIE03–01

3–64 Part 3 – Troubleshooting

Troubleshooting To troubleshoot, proceed as follows:

Caution Be sure to turn off power switch before connecting or disconnecting the connector, or parts damage

may occur.

Check power

Is U1

displayed on the

remote controller?

Phases are not

correct.

Replace outdoor

unit PCB.

Yes

L1-L2-L3= 400V –10%

L1-N= 230V –10%

L2-N= 230V –10%

L3-N= 230V –10%

Does the power

correspond with

previous data?

Correct power

supply.

1. Turn the power off.

2. Change L1-L2 or L2-L3.

3. Turn the power on.

Yes