Service manual

ESIE03–01 General Outline: Outdoor Units
Part 1 – System Outline 1–11
3
1
4
5
Stacked The illustration below shows the required installation and service space (mm). The values in brackets
are for the 100 and 125 class.
P Do not stack more than one unit.
P ± 100 mm is required for the drain pipe.
P Seal A in order to prevent outlet air from bypassing.
Multiple rows The illustration below shows the required installation and service space (mm). The values in brackets
are for the 100 and 125 class.
With obstacles in front of the air outlet side With obstacles in front of the air inlet side
One unit per row Multiple units per row
installation impossible