Installation manual

3 English
• Where machines can generate electromagnetic waves. (Control system may malfunction.)
• Where the air contains high levels of salt such as that near the ocean and where voltage fluctuates
greatly such as that in factories. Also in vehicles or vessels.
2-2 ACCESSORIES
Check the following accessories are included with the unit.
2-3 OPTIONAL ACCESSORIES
• The remote controller are required for this indoor unit.
(However, the remote controller is not required for the slave unit of a simultaneous operation system.)
• These are two types of remote controllers: wired and wireless. Select a remote controller from
Table 1 according to customer request and install in an appropriate place.
(For installation, follow the Installation manual included with the remote controllers.)
Ta bl e 1
NOTE
• If the customer wishes to use a remote controller that is not listed above, select a suitable remote
controller after consulting catalogs and technical materials.
Name (1) Installation panel
(2) Attachment
screws for the
installation panel
(3) Paper pattern for
Installation
(4) Insulating tape
Quantity 1 set 9 pcs. 1 pc. 1 pc.
Shape
M4 × 25L
Name (5) Clamp (6) Securing screws
(Other)
• Operation manual
• Installation manual
Quantity 1 large 3 small 2 pcs.
Shape
M4 × 12L
Remote controller Model
FAY-LVE type
Wired type BRC1C61
Wireless type
Heat pump type
BRC7E618
Cooling only type
BRC7E619
FAYP-LV1 type
Wired type BRC1C517
Wireless type
Heat pump type
BRC7E618
Cooling only type
BRC7E619
FAQ-BUV1B type
Wired type BRC1D527
Wireless type
Heat pump type
BRC7E618
Cooling only type
BRC7E619
01_EN_3P083811-3T.fm Page 3 Friday, September 3, 2004 10:17 AM