Service Manual
Table Of Contents
- Cover
- Table of contents
- Part 1 List of Functions
- Part 2 Specifications
- Part 3 Printed Circuit Board Connector Wiring Diagram
- Part 4 Refrigerant Circuit
- Part 5 Functions and Control
- Part 6 Test Operation and Field Settings
- Part 7 Remote Controller
- Part 8 Troubleshooting
- 1. Troubleshooting with LED
- 2. Service Diagnosis
- 3. Error Codes and Description
- 4. Troubleshooting for CTXG, CTXS, FTXS, CDXS, FDXS, FVXS Series
- 5. Troubleshooting for FFQ Series
- 6. Troubleshooting for Branch Provider (BP) Unit
- 7. Troubleshooting for Outdoor Unit
- 8. Thermistor Resistance/Temperature Characteristics
- 9. Pressure Sensor
- 10. Method of Replacing Inverter’s Power Transistors Modules
- Part 9 Appendix
SiUS181631EA CTXG, CTXS, FTXS, CDXS, FDXS, FVXS Series Functions
Functions and Control 95
To delete reservations
An individual reservation
1.
Press .
• The day of the week and the reservation number will be displayed.
3.
Press .
4.
Press until no icon is displayed.
ON TIMER OFF TIMER
blank
No Setting
Pressing puts the sequence in reverse.
5.
Press .
6.
Press .
• If there are still other reservations, WEEKLY TIMER operation will be activated.
Reservations for each day of the week
1.
Press .
• The day of the week and the reservation number will be displayed.
2.
Press to select the day of the week to be deleted.
3.
Hold for about 5 seconds.
4.
Press .
• If there are still other reservations, WEEKLY TIMER operation will be activated.
All reservations
Hold for about 5 seconds with the normal display.
2.
Press to select the day of the week and the
reservation number to be deleted.
• “ ” and “ ” or “ ” blink.
• Pressing changes the ON/OFF TIMER mode in sequence.
• Selecting “blank” will cancel any reservation you may have.
• This function can be used for deleting reservations for each day of the week.
• It can be used while confirming or setting reservations.
• Be sure to direct the remote controller toward the indoor unit and check for a receiving tone
and blinking of the multi-monitor lamp.
• The TIMER lamp goes off.
• This operation cannot be used for the WEEKLY TIMER setting display.
• All reservations will be deleted.
• The selected reservation will be deleted.
• Be sure to direct the remote controller toward the indoor unit and check for a receiving
tone and blinking of the multi-monitor lamp.
• Be sure to direct the remote controller toward the indoor unit and check for a receiving
tone and blinking of the multi-monitor lamp.
• The reservation of the selected day of the week will be deleted.