User`s manual

English 8
AIRFLOW DIRECTION ADJUST
• There are 2 ways of adjusting the airflow direction.
(When the operation stops, the horizontal blades
at the air outlet (Up and down direction adjust-
ment blades) close automatically.)
1. A. Up and down adjustment
2. B. Left and right direction
A. UP AND DOWN DIRECTION
Press the AIRFLOW DIRECTION ADJUST
button to select the air direction as following.
The AIRFLOW DIRECTION dis-
play swings as shown the left and
the airflow direction continuously
varies. (Automatic swing setting)
Press AIRFLOW DIRECTION
ADJUST button to select the air
direction of your choice.
The AIRFLOW DIRECTION dis-
play stops swinging and the air-
flow direction is fixed (Fixed
airflow direction setting).
A. Up and down
direction
B. Left and right direction
Fig. 2
swing
MOVEMENT OF THE HORIZONTAL BLADE
For the following conditions, micro computer con-
trols the airflow direction so it may be different from
the display.
NOTE
• When group control is performed on the simulta-
neous operation system (twin and triple), airflow
direction cannot be individually set on the slave
units.
We recommend using the fan in the position shown
above when fixing the fan direction.
Operation
mode
• COOLING
• AUTOMATIC
COOLING
• PROGRAM
DRY
• HEATING
• AUTOMATIC
HEATING
Up and
down
direction
• When operating
continuously at
downward air-
flow direction
(Air blows in the
automatically set
direction for a
period of time to
prevent conden-
sation on the
horizontal
blades.)
• When room
temperature is
higher than the
set temperature
• When the HEAT-
ING OPERA-
TION starts or
during the
DEFROST
OPERATION (if
frost forms on
the outdoor unit)
(The airflow
direction
becomes hori-
zontal so that it
does not blow
directly toward
your body.)
Indoor
unit
(Slave)
Indoor
unit
(Master)
Outdoor
unit
Outdoor
unit
Triple
Remote
controller
Twin
Indoor
unit
(Slave)
Recommended airflow direction positions
Cooling
Heating
01_EN_3P303408-2D.fm Page 8 Sunday, September 30, 2012 2:33 PM