00_CV_3P303408-2D_01.
00_CV_3P303408-2D_02.fm Page 1 Monday, September 24, 2012 4:19 PM Thank you for purchasing this product unit. Carefully read this operation manual to ensure proper operation. After reading the manual, file it away for future reference. Furthermore, make certain that this operation manual is handed to a new user when he takes over the operation. As this operation manual is dedicated for the indoor unit, refer to also the operation manuals attached to the outdoor unit and the remote controller.
00_CV_3P303408-2D_02.fm Page 2 Monday, September 24, 2012 4:19 PM ■ DISPOSAL REQUIREMENTS ■ VORSCHRIFTEN ZUR ENTSORGUNG ■ INSTRUCTIONS D’ÉLIMINATION ■ REQUISITOS PARA LA ELIMINACIÓN ■ SPECIFICHE DI SMALTIMENTO ■ ΠΡΟΫΠΟΘΕΣΕΙΣ ΑΠΟΡΡΙΨΗΣ ■ VEREISTEN VOOR HET OPRUIMEN ■ REQUISITOS PARA A ELIMINAÇÃO Disposal requirements Your air conditioning product is marked with this symbol. This means that electrical and electronic products shall not be mixed with unsorted household waste.
01_EN_3P303408-2D.fm Page 1 Sunday, September 30, 2012 2:33 PM CONTENTS 1. SAFETY PRECAUTIONS............................... 1 2. WHAT TO DO BEFORE OPERATION........... 4 3. OPERATION RANGE..................................... 5 4. INSTALLATION SITE ..................................... 6 5. OPERATION PROCEDURE........................... 6 6. OPERATION CHARACTERISTICS................ 6 7. OPTIMUM OPERATION................................. 9 8. MAINTENANCE (FOR SERVICE PERSONNEL)...................... 9 9.
01_EN_3P303408-2D.fm Page 2 Sunday, September 30, 2012 2:33 PM Consult your local dealer regarding relocation and reinstallation of the air conditioner. Improper installation work may result in leakage, electric shocks or a fire. Be sure to use fuses with the correct ampere reading. Do not use improper fuses, copper or other wiring as a substitute, as this may result in electric shocks, a fire, injury or damage to the air conditioner. Be sure to earth the air conditioner.
01_EN_3P303408-2D.fm Page 3 Sunday, September 30, 2012 2:33 PM • NOTE TO SERVICE PERSONNEL WARNING RISK OF ELECTRIC SHOCKS OR, A FIRE • When checking the electric components (such as the inside of the control box, fan motor, drain pump, etc.), make sure to shut off all power supply for the air conditioner (including both indoor and outdoor units).
01_EN_3P303408-2D.fm Page 4 Sunday, September 30, 2012 2:33 PM 2. WHAT TO DO BEFORE OPERATION This operation manual is for the following systems with standard control. Before initiating operation, contact your local dealer for the operation that corresponds to your system. 1-1. FHQ NOTE • Contact your local dealer in case of changing the combination or setting of group control and two remote controller control systems.
01_EN_3P303408-2D.fm Page 5 Sunday, September 30, 2012 2:33 PM Names and functions of parts 3. OPERATION RANGE If the temperature or the humidity is beyond the following conditions, safety devices may work and the air conditioner may not operate, or sometimes, water may drop from the indoor unit. a f 3-1. FHQ COOLING b c g d e a b c d e f g Air outlet Horizontal blade (at air outlet) Suction grille (Refer to “8. MAINTENANCE” on page 9.) Air filter (inside suction grille) (Refer to “8.
01_EN_3P303408-2D.fm Page 6 Sunday, September 30, 2012 2:33 PM 4. INSTALLATION SITE Regarding places for installation • Is the air conditioner installed at a well-ventilated place where there are no obstacles around? • Do not use the air conditioner in the following places. a. Filled with much mineral oil such as cutting oil b. Where there is much salt such as a beach area c. Where sulfured gas exists such as a hot-spring resort d.
01_EN_3P303408-2D.fm Page 7 Sunday, September 30, 2012 2:33 PM ■ CHARACTERISTICS OF THE HEATING OPERATION (HEATING OPERATION AND AUTOMATIC HEATING OPERATION) START OF OPERATION • It generally takes a longer time for indoor temperature of the HEATING OPERATION to reach the set temperature compared to the COOLING OPERATION. It is advisable to start operation in advance using the TIMER OPERATION. Perform the following operation to prevent heating capacity decrease and discharge of cool air.
01_EN_3P303408-2D.fm Page 8 Sunday, September 30, 2012 2:33 PM AIRFLOW DIRECTION ADJUST • There are 2 ways of adjusting the airflow direction. (When the operation stops, the horizontal blades at the air outlet (Up and down direction adjustment blades) close automatically.) 1. A. Up and down adjustment 2. B. Left and right direction MOVEMENT OF THE HORIZONTAL BLADE For the following conditions, micro computer controls the airflow direction so it may be different from the display. Operation mode A.
01_EN_3P303408-2D.fm Page 9 Sunday, September 30, 2012 2:33 PM B. LEFT AND RIGHT DIRECTION • The left and right airflow direction can be fixed at the desired position manually. NOTE • Only make adjustments after you have fixed the up and down airflow direction in a position. Your hand may get caught if you attempt to make adjustments while the horizontal blade is swinging. • Stop the horizontal blade from swinging before trying to angle them. Working while the blade is moving may get your fingers pinched.
01_EN_3P303408-2D.fm Page 10 Sunday, September 30, 2012 2:33 PM CAUTION • Do not wash the air conditioner with water. It may cause electric shocks or a fire due to leakage. • Make sure to turn off the air conditioner when taking care of the air conditioner and disconnect the power supply breaker. Unless the power supply is disconnected, it may cause electric shocks and injuries. • When working at a high place, give caution to your footing.
01_EN_3P303408-2D.fm Page 11 Sunday, September 30, 2012 2:33 PM NOTE • Do not wash the air filter with water of 50°C or higher. It may cause decolorization and deformation. • Do not heat the filter with fire. It may cause burning. 2 Keep holding the clips at the upper part of the suction grille and pull them to frontward. Clip 4. Attach the air filter. After the air filter is cleaned, return the air filter to the original place as it was attached before. 5. Close the suction grille.
01_EN_3P303408-2D.fm Page 12 Sunday, September 30, 2012 2:33 PM 7. Close the suction grille. Slide all the knobs in the reverse order mentioned in the Clause 1 and securely fix them. HOW TO CLEAN AIR OUTLET, OUTSIDE PANEL, AND REMOTE CONTROLLER • Wipe them with a dry soft cloth. • When the stain cannot be wiped off, dip the cloth in the neutral detergent diluted with water and twist the cloth. After wiping off stain with this cloth, wipe them with dry cloth.
01_EN_3P303408-2D.fm Page 13 Sunday, September 30, 2012 2:33 PM 9. NOT MALFUNCTION OF THE AIR CONDITIONER 9-1. FHQ The following symptoms do not indicate air conditioner malfunction • HEATING OPERATION within 6 hours after the power is supplied to the air conditioner. Some models perform the following operation to protect the devices.
01_EN_3P303408-2D.fm Page 14 Sunday, September 30, 2012 2:33 PM IV. THE AIRFLOW DIRECTION IS DIFFERENT FROM THE SETTING, OR THE AIRFLOW DIRECTION IS DIFFERENT FROM THE DISPLAY ON THE REMOTE CONTROLLER • The horizontal blades do not swing when the remote controller displays the swing operation.
01_EN_3P303408-2D.fm Page 15 Sunday, September 30, 2012 2:33 PM X. THE AIR CONDITIONER DOES NOT COOL EFFECTIVELY • The air conditioner is operating in the PROGRAM DRY OPERATION. This is because program dry mode operates so that the indoor temperature decreases as little as possible. Lower the indoor temperature using the COOLING OPERATION, and then use the PROGRAM DRY OPERATION. (Refer to “CHARACTERISTICS OF THE PROGRAM DRY OPERATION” on page 7.
01_EN_3P303408-2D.fm Page 16 Sunday, September 30, 2012 2:33 PM • Check if direct sunlight enters the room (when cooling). Use curtains or blinds. • When there are too many inhabitants in the room (when cooling). • Check if the heat source of the room is excessive (when cooling). 4. Operation was performed or stopped although the on/off button was not pressed. • Are you sure that the ON/OFF timer operation is not used? Turn off the ON/OFF timer.
00_CV_3P303408-2D_01.
