Specifications

4P357732-1 – 2014.04 Page 52 of 58
5.3 Test Operation Procedure
Following test examples are explained by using “Modbus poll” version 6.0.2
5.3.1 Prepare register groups
1. Start-up “Modbus poll”
2. Setup the input registers or holding register groups by selecting following in the dropdown menu:
“File” > “New Crtl+N”
& “Setup” > “Read/Write Definition… F8”
Note: Each registers group can be separately saved by “File” > “Save as … “ (*.mbp)
Example how to define the input registers 30001 till 30008
Note: In “Modbus poll” the register address is defined as follows: 30011 -> 10
For each register the “Alias” description can be set
For each register the “Format” should be set by right
clicking: “Format > binary”