Specifications

ESIE02–01 Disassembly and Maintenance: Outdoor Units
Part 5 – Disassembly and Maintenance 5–11
3
5
1
5
Components The table below contains the components of the exploded view.
No. Component No. Component
1 Front plate assy 21 Flare nut
2 Side plate back assy 22 Gas stop valve assy
2.1 Handgrip 22.1 Valve core service port
3 Side plate front assy 22.2 Cover for service port
3.1 DAIKIN name plate 22.3 Stop valve cover
3.2 R407C sticker 23 Flare nut
3.3 Handgrip 24 Strainer
4 Top plate 25 Fan motor
4.1 Wiring diagram 26 Propeller fan assy
5 Discharge grille 27 Fan nut
6 Suction grille 28 Heat exchanger fixing plate
7 Bottom frame + set plate assy 29 Cushion outdoor heat exchanger
7.1 Bottom frame assy 30 Outdoor thermistor mounting plate
7.2 Compressor set plate assy 31 Switch box assy
8 Service cover assy 31.1 Switch box plate
9 Partition plate 31.2 Fan capacitor
10 Fan motor stand 31.3 Reverse phase protector
11 Compressor with accumulator 31.4 Magnetic switch
12 Compressor rubber 31.5 Surge absorber
13 Compressor nut 31.6 Magnetic contactor
14 Terminal rubber 31.7 Thermostat
15 Terminal cover 31.8 Terminal strip
16 Terminal nut 31.9 Noise filter
17 Compresssor sound absorber shell 31.10 Wire clamp
18 Heat exchanger assy 31.11 Insulation strip for wire clamp
19 Liquid pipe asy 31.12 Locking guard spacer
19.1 Capillary tube —
20 Liquid stop valve assy
20.1 Valve cap (stop valve)