Service manual

Operation Manual SiBE07-724_B
58 Operation Manual
2.2 AUTO · DRY · COOL · HEAT · FAN Operation
10
AUTO · DRY · COOL · HEAT · FAN Operation
 To start operation
1.
: AUTO
: DRY
: COOL
: HEAT
:FAN
2. Press “ON/OFF button”.
• The OPERATION lamp lights up.
 To stop operation
3. Press “ON/OFF button” again.
• Then OPERATION lamp goes off.
 To change the temperature setting
4. Press “TEMPERATURE adjustment button”.
DRY or FAN mode AUTO or COOL or HEAT mode
The temperature setting is not variable.
Set to the temperature you like.
2, 3
1
4
5
<FDKS>
<FDXS>
The air conditioner operates with the operation mode of your choice.
From the next time on, the air conditioner will operate with the
same operation mode.
Press “MODE selector button”
and select a operation mode.
• Each pressing of the button advances
the mode setting in sequence.
Press “ ” to raise the temperature and press
“ ” to lower the temperature.