Service manual

SiBE07-724_B Outdoor Unit - RK(X)S25/35G2V1B

Removal Procedure 151

2.2 Removal of Electrical Box

Procedure Warning Be sure to wait for 10 minutes or more after turning off all power

supplies before disassembling work.

Step

Procedure Points

Disconnect the 2

connectors for the

reactor.

Preparation



Remove the panels and

disconnect the connector for

the fan motor according to

the “Removal of Outer

Panels / Fan Motor”.

Cut the clamps at 2

locations.

Disconnect the

connector for the

compressor [S30].



When reassembling, coil the

excessive lead wire and

hang the loop on the hook.

(R9338)

(R9339)

(R9340)

[S30]